MFRC522 RFID Reader Writer Module – 13.56MHz
- Reads compatible 13.56MHz RFID cards wirelessly
- Supports MIFARE contactless card technologies
- Communicates with controllers through SPI interface
- Ideal for access control prototypes
- Genuine partFrom verified suppliers
- Checked in DhakaBefore it is dispatched
- Cash on deliveryAnywhere in Bangladesh
Description
The MFRC522 RC522 RFID Module is a 13.56MHz contactless reader and writer designed for short-range identification applications. It communicates with a microcontroller through the SPI interface and supports compatible MIFARE cards and tags. The module operates at 3.3V and is commonly used with Arduino, ESP32, and other embedded platforms for access-control prototypes, attendance systems, and object identification projects. Typical kits include an RFID card, key tag, and header pins, although included accessories may vary by seller. The reader is intended for short-distance communication, so keep the card or tag close to the antenna during scanning. Use 3.3V logic and avoid direct 5V signal connections.
Specifications
| Controller IC | MFRC522 |
|---|---|
| Operating Frequency | 13.56MHz |
| Operating Voltage | 3.3V DC |
| Communication Interface | SPI |
| Supported Cards | MIFARE S50/S70, Ultralight and compatible tags |
| Reading Distance | Up to approximately 5cm, antenna dependent |
| Operating Current | Approximately 13–26mA active |
| Logic Level | 3.3V |
| Module Interface Pins | SDA/SS, SCK, MOSI, MISO, IRQ, GND, RST, 3.3V |
| Applications | Access control, attendance, identification systems |
